Qualification is the part of additive manufacturing that never makes the trade-show reel. A machine can print a flawless part on day one, but turning that machine, its feedstock and its process into something a customer in a regulated industry will accept takes documented risk analysis, controlled procedures and evidence that holds up in an audit. German company Qualified AM is betting that a large share of that paperwork can be structured by software, and at Formnext 2026 it opened its QamX platform to the wider AM industry, with a EUR 990 net entry package aimed at organizations that want to try it on a single project.

According to the company's QamX product page, the software is meant to accelerate qualification and compliance for AM equipment, processes, materials and parts. It describes QamX as an AI-powered suite covering standards compliance, risk mitigation and pFMEA (process failure mode and effects analysis), and it lists the ISO/ASTM standards it supports, including the 52900 series and ISO/ASTM 52920.

Four modules and an assistant

As reported by 3D Printing Industry, QamX is split into four modules: risk assessment (RISK), quality management (QMS), qualification and compliance reporting (CERT) and supply-chain management (SCM). The vendor's own page stresses an AI-powered, audit-ready quality management system with automated documentation and traceability. The RISK module maps onto the pFMEA and risk-mitigation work the product page emphasizes.

Sitting across those modules is an AI assistant called Qami. Qualified AM describes it as "AI supported, human-approved," a phrase that matters more than it might first appear. In a qualification context, the value of a document comes from someone accountable signing off on it. A tool that drafts risk entries or maps requirements to a standard can save time, but an auditor will still want to know which engineer reviewed and approved each claim. Framing the assistant as a drafting aid rather than a decision-maker is the only framing that survives contact with a regulated customer.

Why ISO/ASTM 52920 is the anchor

ISO/ASTM 52920 is the standard the whole package is built around. It is the one standard explicitly named in the entry offer. The connection is not incidental: founder and CEO Gregor Reischle has convened the ISO/ASTM joint group on AM qualification principles since 2018, according to 3D Printing Industry. A company whose founder has spent years shepherding the qualification framework through standards committees is now selling tooling that operationalizes it, which is either a reassuring sign of domain depth or a reminder that the toolmaker has a stake in how the standard is read. Probably both.

What EUR 990 actually buys

The Qualification Pass is the most concrete part of the announcement, and its terms are worth reading closely. Per 3D Printing Industry, the EUR 990 net fee covers one organization and provides:

  • Four active months of QamX Foundation
  • One qualification project
  • Two users at one site
  • ISO/ASTM 52920 plus two additional standards
  • Two hours of expert support
  • Eight months of read-only access after the active period ends

Audits and certification are not included. That distinction is important: the pass helps an organization assemble and structure its evidence, but it does not hand over a certificate. Third-party assessment remains a separate step and a separate cost.

Advertisement

The vendor's product page adds a procedural detail. The pass is described as a one-time, limited-time Formnext special, and the EUR 990 is payable only after a consultation and acceptance of an offer. In practice, that means a buyer talks to Qualified AM first, agrees on scope, and pays once the terms are settled, rather than clicking through a checkout.

A reality check from a WAAM project

The most instructive data point in the coverage is a wire arc additive manufacturing (WAAM) qualification project with Vogelsang. The cell uses an ABB robot and a Fronius welder, and the project spans ISO/ASTM 52920 and 52943 alongside the welding standards ISO 3834, ISO 15614, ISO 9606 and ISO 14732. That list alone shows how quickly a metal AM process stops being "a printer" and becomes a welding procedure subject to welder qualification, procedure tests and quality requirements for fusion welding.

The timeline is the useful part. The initial risk assessment is expected to take one to two focused working days, but physical qualification is expected to take roughly ten months to a year. Software can compress the analysis and documentation work dramatically; it does not shorten the time needed to build test coupons, run mechanical tests and accumulate results. Qualified AM's claim of up to 20x efficiency gains should be read in that light. 3D Printing Industry notes it is an experience-based estimate, not an independently verified figure, and it plausibly applies to the documentation side rather than to the full path from first print to approved part.

Advertisement

QamX has also been used in the DILAPRO project, an EU co-funded effort on digital tools for laser-based manufacturing, and in an operational qualification exercise at the European Defence Agency's AM Village 2026, according to the same report, suggesting some exposure in research and defense-adjacent settings before the wider opening.

What It Means for Makers

Most hobbyists will never need any of this. The audience here is the small shop, the service bureau with a few industrial machines, or the maker-turned-business that has started fielding requests for brackets, fixtures or end-use parts from customers who ask about traceability and process control. For that group, qualification usually starts as a scattered collection of spreadsheets, print logs and material certificates, and the hard part is knowing what a standard actually expects to see.

The appeal of a scoped, time-limited pass is that it frames one qualification project against one primary standard with a defined structure: identify risks, document the process, tie evidence to requirements. Even a shop that does not continue with the software after four months would come away with a worked example of how a 52920-style qualification is organized, and the eight months of read-only access preserve that record.

The caveats are equally clear. EUR 990 does not include audits or certification, two hours of expert support is not much for a first-timer, and the roughly ten-month-to-a-year physical qualification timeline in the Vogelsang project is a sober reminder that testing, not paperwork, usually sets the pace. Anyone considering the pass should arrive at the consultation with a specific part, process and customer requirement in mind, so the single project slot is spent on something that will matter commercially.

Bottom Line

QamX is a structured way to organize qualification evidence around ISO/ASTM 52920, built by a team with deep roots in that standard. The EUR 990 pass lowers the cost of finding out whether that structure suits a small operation, but it is a starting framework, not a shortcut to certification. Qualified AM is demonstrating the software at Formnext in Hall 12.1, Booth C71-1.

Sources