Bambu Lab
Every FilamentFeed story on Bambu Lab — news, reviews, and analysis, newest first.
-
Business
Who Actually Makes Filament: The Supply Chain Behind Your Spools
The filament market is less diverse than it appears. A small number of polymer manufacturers supply most brands. This guide traces the supply chain from raw resin to finished spool and explains what quality differences actually matter.
-
Materials
High-Speed PLA: How to Print at 200–300mm/s Without Sacrificing Quality
High-speed PLA formulations from eSUN, Polymaker, and others are engineered for 200–300mm/s printing. This guide covers what makes them different, the right settings, and the hardware you need.
-
Business
Open-Source vs Proprietary 3D Printers: The 2026 Trade-Off Guide
Voron and Prusa represent open-source printing; Bambu Lab and Ultimaker S-series represent the proprietary end. Both camps offer real advantages — this guide breaks down the honest trade-offs for 2026.
-
Software
Orca Slicer Deep Dive: Calibration, Multi-Plate Printing, and How It Compares to Bambu Studio
Orca Slicer is the open-source slicer of choice for serious FDM users in 2026 — with built-in pressure advance calibration, flow rate testing, multi-plate workflows, and broader printer support than Bambu Studio.
-
Printers
Prusa XL 5-Tool Review: Multi-Material Done the Hard Way
The Prusa XL brings a true toolchanger to the desktop — five independent hotends, a 360×360mm bed, and the reliability Prusa is known for. Here's whether the premium is worth it in 2026.
-
Materials
PVA and BVOH Water-Soluble Supports: The Complete FDM Guide
PVA and BVOH dissolve in water, enabling complex geometries impossible with breakaway supports. This guide covers how each material works, compatible hardware, storage requirements, and print settings.
-
Printers
Sovol SV08 Review: Open-Source CoreXY with Klipper in 2026
The Sovol SV08 is a CoreXY printer running Klipper out of the box with an open-source design philosophy, strong community support, and a price that undercuts Bambu Lab's lineup. Here is how it performs.
-
Guides
Bed Leveling Guide: Manual Tramming, BLTouch, and Auto-Cal Explained
Consistent first layers start with proper bed leveling — whether you're manually tramming corners or relying on a 49-point auto-mesh. This guide covers every approach and the settings that matter for each.
-
Guides
3D Printer Enclosure Guide: DIY, Commercial, and Ventilation
Enclosures improve ABS and ASA success rates, reduce noise, and enable safer operation in shared spaces. This guide covers DIY builds, commercial options, ventilation requirements, and which printers need enclosing.
-
Printers
Best 3D Printers for Engineering Filaments in 2026
Printing PEEK, polycarbonate, and high-performance nylon requires hotends above 300°C, beds above 100°C, and heated enclosures. Here are the best printers that actually meet those requirements in 2026.
-
Printers
QIDI Q1 Pro Review: Heated Chamber Performance at a Competitive Price
The QIDI Q1 Pro brings a 60°C active heated chamber, 600mm/s speed, and Klipper firmware to the enclosed printer segment at a price that undercuts the Bambu P1S. Here's the full breakdown.
-
Printers
FlashForge Adventurer 5M Pro Review: Fast, Enclosed, and Genuinely Capable
The Adventurer 5M Pro hits 600mm/s in a fully enclosed CoreXY chassis with automatic levelling and a quick-swap nozzle system. Here's how it performs against the Bambu A1 and who should buy it.
