Bambu Lab
Every FilamentFeed story on Bambu Lab — news, reviews, and analysis, newest first.
-
Printers
Bambu Lab P1S: Complete Guide for Mid-2026
Everything you need to know about the Bambu Lab P1S—specs, AMS multi-material system, enclosed chamber performance, and how it stacks up against the X1C in 2026.
-
Printers
Elegoo Neptune 4 Max Review: Giant Bed, Klipper, and Value Printing in 2026
The Elegoo Neptune 4 Max packs a 420×420mm bed, Klipper firmware, and 500mm/s claimed speed into a budget-priced package. Here is what the machine actually delivers.
-
Printers
Prusa XL 5-Tool Review: Multi-Material Done the Hard Way
The Prusa XL brings a true toolchanger to the desktop — five independent hotends, a 360×360mm bed, and the reliability Prusa is known for. Here's whether the premium is worth it in 2026.
-
Printers
Sovol SV08 Review: Open-Source CoreXY with Klipper in 2026
The Sovol SV08 is a CoreXY printer running Klipper out of the box with an open-source design philosophy, strong community support, and a price that undercuts Bambu Lab's lineup. Here is how it performs.
-
Printers
Best 3D Printers for Engineering Filaments in 2026
Printing PEEK, polycarbonate, and high-performance nylon requires hotends above 300°C, beds above 100°C, and heated enclosures. Here are the best printers that actually meet those requirements in 2026.
-
Printers
QIDI Q1 Pro Review: Heated Chamber Performance at a Competitive Price
The QIDI Q1 Pro brings a 60°C active heated chamber, 600mm/s speed, and Klipper firmware to the enclosed printer segment at a price that undercuts the Bambu P1S. Here's the full breakdown.
-
Printers
FlashForge Adventurer 5M Pro Review: Fast, Enclosed, and Genuinely Capable
The Adventurer 5M Pro hits 600mm/s in a fully enclosed CoreXY chassis with automatic levelling and a quick-swap nozzle system. Here's how it performs against the Bambu A1 and who should buy it.
-
Printers
Prusa MK4S Review: The Benchmark Workhorse in 2026
The Prusa MK4S adds a refined Nextruder, Input Shaper resonance compensation, and improved auto bed levelling to the MK4 platform. We break down whether it justifies the price against faster competitors.
-
Printers
Bambu Lab's H2D Arrives: Dual Extruders, Large Format, and a New Price Point
The H2D brings dual independent toolheads to the Bambu ecosystem — 350×320mm bed, 300°C hotends, and a $1,199 launch price that targets serious makers and small studios.
-
Printers
Creality K2 Plus Review: Is the Budget Multicolor CoreXY Any Good?
The Creality K2 Plus pairs a 350mm CoreXY chassis with the CFS multicolor system and a $699 launch price. We look at whether it's a real Bambu challenger or just a spec sheet.
-
Printers
Anycubic Goes All-In on Color: The Kobra S1 Line Scales to 16 Hues
Anycubic's 2026 Kobra lineup pushes budget multicolor to an extreme — up to 16 colors via stackable ACE 2 Pro units, a $459 early-bird ACE 2 Pro Combo, a 350mm Max, and a $299 four-color Kobra X. Here's the lineup and what it signals.
-
Printers
Creality's KliTek Toolchanger Wants to Make Multicolor and Mixed Nozzles Routine
Creality's upcoming K3 flagship uses a new lightweight nozzle-changing system called KliTek that enables print-in-place multicolor, stable 80A TPU, and mixing nozzle sizes mid-print — claiming TPU flow rates seven times those of typical consumer machines.
