Anyone who has run a resin printer knows the print is only half the job. A part pulled off the build plate is still slick with uncured resin. It has to be washed, dried and post-cured before it behaves like the material on the datasheet. On November 11, Axtra3D moved to take over that second half of the job. The company announced the Axtra Wash Series 1 and Axtra Cure Series 1, updated industrial post-processing units that are available to order now. Both are meant to carry the company's Axtra Workflow past its Lumia X1 printer and into the steps that come after printing.
Neither machine is a desktop wash-and-cure combo. They are industrial stations built around production photopolymer printing. They are still worth a close look, because the engineering choices show where professional resin post-processing is heading: more automation, more measurement, and process settings logged to a data platform.
Wash Series 1: Washing and Drying in One Station
The Wash Series 1 handles both washing and drying, which are usually separate steps. According to Axtra3D, it cleans parts with three technologies: agitation, Venturi and a nanobubble eductor. Drying is done by an automated traveling air knife, which delivers compressed-air drying. In many shops, that job still means a heat gun, compressed air or a rack and some waiting.
The unit has two removable 50-liter tanks. Axtra3D says it is compatible with non-flammable cleaning detergents. Anyone who has stored and disposed of large amounts of isopropyl alcohol will see why that matters at production scale. Operators run the machine from a touchscreen with standard and custom wash and dry profiles, and the chamber cleans itself.
The press release also lists what is new in Series 1:
- A stainless-steel wash tub
- An anodized-aluminum build that matches the Lumia X1
- An automated exhaust at the end of each cycle, meant to limit operator exposure to detergent vapors
- Provisions for filtration and monitoring, for maintenance management
- Multiple solvent modes
Most of these changes are about durability, operator safety and running costs. The automated exhaust addresses vapor exposure at the end of a cycle. The filtration and monitoring provisions point toward easier maintenance and knowing when a bath needs attention, which are two of the hidden costs of running resin printers at volume. The multiple solvent modes matter because a shop running several resins may not want to clean all of them the same way.
Cure Series 1: Two Chambers, Run Separately
The Cure Series 1 stacks two machines in one cabinet. An upper UV chamber sits above a lower thermal oven, and Axtra3D says each one operates independently, so customers can select either process or combine both. In practice, that means one batch can be under UV light while another goes through a heat cycle.
The UV chamber uses 324 LEDs at three independently configurable wavelengths: 365, 385 and 405 nm. Choosing among them lets an operator match the cure light to the chemistry instead of using one fixed wavelength for everything. Exposure time and power are both programmable.
The most notable feature may be the broadband photodiodes that monitor light power. LEDs can lose output as they age, and a cure chamber that measures its own output gives operators a way to notice that. For anyone producing functional or regulated parts, a measured dose is much easier to defend than an assumed one. The chamber also includes temperature sensing.
The lower oven runs thermal profiles up to 250 °C (482 °F), with automatic or custom ramp rates. Thermal post-cure matters for many engineering resins, where heat treatment after UV exposure can be needed to reach a material's full mechanical and thermal properties. Controlled ramps are meant to keep the heating process repeatable from batch to batch.
The Data Layer: Axtra.insight
Both units integrate with Axtra.insight, Axtra3D's data platform, and are part of the wider Axtra Workflow. VoxelMatters confirms the connection and describes the launch as extending that workflow beyond the Lumia X1.
This is where a production pitch differs from a hobby product. In a connected shop, a part's record covers more than the print job. It can also include the wash profile, the cure wavelength and dose, and the oven ramp. That kind of record is what lets a manufacturer trace a bad batch back to its cause, or show a customer that every part went through the same process. Axtra3D says the integration provides greater visibility into process settings and results, but the announcement does not say exactly which data each unit reports to Axtra.insight. Given the photodiode monitoring and the programmable profiles, though, these machines are well placed to produce the kind of data worth logging.
The release includes statements from Rajeev Kulkarni, Axtra3D's Chief Strategy Officer, who frames the launch as a step toward a more connected production process, with fewer disconnected steps and a clearer path from design to finished part.
Not Locked to One Printer
The units are built to match the Lumia X1 visually and to connect with it in software, but they are not tied to it. VoxelMatters reports that both work with the Lumia X1 family and with other photopolymer processes, including stereolithography and digital light processing. The press release likewise names SLA, DLP and related processes. That matters for shops that run mixed fleets. A post-processing line that only serves one printer brand is harder to justify than one that can take parts from every vat-polymerization machine on the floor.
What It Means for Makers
Most people reading FilamentFeed won't put a 50-liter wash tank in the garage. These machines are aimed at production shops, service bureaus and manufacturers that already run resin printing as a business. Still, the announcement says a few useful things about resin post-processing as a whole.
First, the industry treats post-processing as a controlled process step, not a chore. Programmable profiles, set wavelengths and measured light output are the industrial version of what careful hobbyists already do with timers and test coupons. If your resin parts come out inconsistent, the cause may well be in the wash and cure steps rather than the printer.
Second, wavelength choice and thermal post-cure are being treated as core features. If you work with engineering resins on a smaller scale, it is worth checking whether your resin's datasheet calls for a specific cure wavelength or a heat cycle that your current setup can't deliver.
Third, non-flammable detergents and automated exhaust show how much attention solvent handling and operator exposure now get. That lesson applies at every scale, including a small workbench.
Axtra3D says orders are open now. The sources do not give pricing or a shipping timeline, so shops evaluating the units will need to get those details from the company.