Raise3D is giving owners of its RMS220 selective laser sintering printer a taller machine, and they won't need to open a toolbox. According to TCT Magazine, a free update rolling out on November 17 raises the printer's Z build height from 350 mm to 450 mm, so the envelope becomes 220 x 220 x 450 mm. Nominal build volume goes from 16.9 L to 21.8 L, an increase of nearly 30 percent. Raise3D says the update needs no hardware changes, so existing RMS220 owners get the extra 100 mm of height as a software and firmware change.
The company will show the taller machine at Formnext 2026. Its B520 sandblaster makes its European debut at the same show, after first appearing at RAPID + TCT Boston in April. Raise3D's own RMS220 product page already lists the new 220 x 220 x 450 mm (21.8 L) figure in its key specifications. The page doesn't mention the update date itself; that detail comes from TCT's report.
The numbers, unpacked
The footprint doesn't change. A 220 x 220 mm bed is 484 cm² of build area, and each 100 mm of height on that footprint adds roughly 4.8 L of chamber. At 350 mm the envelope is about 16.9 L; at 450 mm it is about 21.8 L. The ratio of the two heights is 450/350, or roughly 1.29, which matches the "nearly 30 percent" in the announcement. Nothing else about the build area grows.
The rest of the published spec sheet stays the same. Raise3D lists a 75 W infrared fiber laser at 1064 nm and a printing speed of up to 2.2 L/h (quoted at 20% packing density). As with any manufacturer throughput number, read that rate as a best case, not a forecast of your job times. Its meaning depends on packing density, layer settings and material. What is clear is that a fuller, taller chamber means a longer job, and shops will need to plan scheduling around that.
Why height matters more in powder bed
On a filament printer, extra Z height mostly helps you print tall objects. In SLS it does more than that. Unfused powder supports every part in the bed, so parts don't need support structures and don't have to sit on the build plate. They can float anywhere in the volume, stacked in layers. A powder-bed build is a 3D packing problem, not a 2D layout.
That is why the update matters for production. TCT notes that taller builds let SLS users nest more parts vertically. Extra height becomes extra capacity for brackets, enclosures, clips, jigs and small-batch end-use parts. For a shop that already fills its chamber on most jobs, nearly 30 percent more volume can mean fewer builds for the same order. It can also mean more parts per build unit, and the RMS220's interchangeable build units let a powder cake cool outside the printer while the next job starts.
It also changes how jobs get planned. A taller chamber lets an operator combine orders that would have needed two runs, or stack several layers of identical parts and leave room for a few one-off prototypes. Shops that pack builds by hand will find the extra space easy to use. Shops that use automated nesting software will get the most from it.
One-piece parts and the 450 mm demo
Raise3D's demonstration part makes the second argument. It is a 450 mm automotive light cover printed in one piece in PA NEXT powder. Before the update, a part that long would usually have been split into sections and joined after printing. Every joint adds work and a possible weak point, and on a cosmetic or sealing part it can show.
Some geometry is worth knowing here. The space diagonal of the old 220 x 220 x 350 mm envelope is about 468 mm, so a very slender 450 mm part could in theory have fit corner to corner. In practice, that orientation limits how you place the part, ties up most of the bed for one object and leaves little margin from the chamber walls. With 450 mm of straight Z travel, a long part can stand upright, and the rest of the bed stays free for other nested parts. Being able to print tall parts in the orientation you want, not the only one that fits, matters as much as the headline height.
The bottleneck moves downstream
Showing the B520 sandblaster alongside the update makes sense. More parts per build means more parts coming out of the powder cake at once, and every one of them needs depowdering and surface finishing. In many small SLS operations, post-processing already limits output more than the printer does. A taller, fuller bed makes that worse.
Raise3D's message at Formnext seems to be that it sells a workflow, not just a printer. Bigger builds increase the load on finishing equipment. Before relying on the extra volume, shops should check whether their breakout station, blasting setup and staff time can handle about 30 percent more parts per cycle.
What It Means for Makers
For anyone who already owns an RMS220, this is a free upgrade. Raise3D says the update is free and needs no hardware changes, so owners can install it when it rolls out on November 17. The real question is how much of the new height each shop's work will use.
For shops running mixed batches of small functional parts, the main benefit is nesting: more parts per job and potentially fewer jobs per week. For shops that make long, single-piece parts, such as ducts, housings and covers like Raise3D's light cover, it removes the need to split parts and bond them back together. For shops that rarely fill the old chamber, it changes little, though a bigger envelope is handy for the occasional oversized job.
Owners should validate before relying on the change. A taller build means a longer job and more powder in the bed per run. Before committing customer work to full-height builds, run test prints, check dimensional consistency from the bottom of the bed to the top, and re-check job times and powder use against your own records. Neither TCT nor Raise3D's spec page gives material-use or timing figures for full-height builds, so collect that data yourself.
Bottom Line
The RMS220 gets an extra 100 mm of Z height and about 4.9 L of build volume through a free update. Because powder-bed parts can be stacked, that height goes straight to throughput and single-piece part size. It also puts more pressure on post-processing, which is likely why Raise3D is bringing a sandblaster to Formnext alongside it.