Most makers file UV printing alongside vinyl cutters and sublimation presses: useful for personalization, but not really fabrication. LONGER wants to change that. In a profile published by 3Dnatives on November 16, 2026, the company presents its ePrint as a desktop UV flatbed that does more than lay colour on a surface. It builds up cured ink into physical relief up to 15 mm tall, and LONGER says the machine supports more than 20 texture techniques, from faux embroidery to stone grain. Some of the 3Dnatives article reads like a promotional feature, so the performance figures below are the manufacturer's claims, not independently tested results.

What the Machine Is

The ePrint is a UV flatbed. Instead of feeding sheets through rollers, it holds a rigid object on a bed while the printheads pass over it, jetting ink that a UV lamp cures almost immediately. Since every pass hardens before the next one lands, the printer can stack material in Z. 3Dnatives says the machine cures successive layers of ink to create a physical relief effect that can reach 15 mm, and LONGER's release says it can print on materials with 2 to 10 mm of height variation.

According to 3Dnatives, the ePrint uses two printheads feeding 12 ink channels. LONGER claims it can reproduce over a million colours at up to 1,440 dpi across a 310 x 420 mm print area, which is roughly A3-sized. A 16 MP camera scans the bed and previews the printable area. That matters on a flatbed, where getting artwork registered to an irregular object you placed by hand is often the hardest part of the job.

LONGER lists more than 300 compatible materials, including wood, acrylic, leather, metal and glass. The printer ships in two configurations. The Dual-UV configuration is aimed at UV direct printing, detailed graphics, textured surfaces and full-colour relief. UV+DTF supports UV direct, UV DTF, DTF and DTG workflows. 3Dnatives frames the second option as bringing several production methods that usually need separate machines onto one desktop platform, covering both hard goods and transfers for fabric. UV DTF prints onto a film that is then transferred to a hard surface, which suits objects that are hard to position inside the printer, such as jars and bottles.

Twenty-Odd Ways to Fake a Surface

LONGER is selling the texture work more than the raw colour output. The techniques named in the 3Dnatives piece include faux embroidery, wood and stone textures, mirror-like shine and double-sided colour. As 3Dnatives describes them, faux embroidery stacks multiple layers of ink to create a raised, stitched effect. Wood and stone textures add natural-looking surface patterns. Mirror-like shine comes from combinations of inks and coatings, and double-sided colour lets both sides of the same object be coloured. The article adds that the machine can mix finishes such as matte and glossy within one design, which it pitches for phone cases, signage elements and textured panels.

FDM users will recognize the basic idea. Height is a variable you control in software, and the result depends on how well the software turns an intent into deposition. A 15 mm relief ceiling is modest next to any filament printer, but the comparison isn't really fair. The ePrint isn't trying to make parts. It is trying to give a phone case or sign a surface that a fingertip can read, in full colour, without painting.

The Kickstarter Background

The ePrint isn't new hardware. LONGER launched the series on Kickstarter in November 2025, and its own press release from that month says the campaign reached its $50,000 goal in 60 seconds and passed $1 million within 45 minutes. Those numbers come from the company, and early-hour totals on crowdfunding platforms say more about marketing reach and pent-up demand than about how well the product performs.

Advertisement

That release splits the line into two models. The ePrint has dual printheads and 12 channels. The ePrint SE has a single printhead and 6 channels. Kickstarter pricing was $1,499 for the SE, $1,899 for the ePrint and $2,949 for an All-in-1 Combo. Those were campaign prices from last year's launch, so buyers should check current pricing before budgeting around them.

The same release lists several engineering claims. LONGER says the dual-head ePrint is up to 6x faster than single-head desktop UV printers, that it has automated printhead cleaning with white-ink circulation, and that it takes 200 ml cartridges across all 12 channels, with open-ink compatibility. The release says the cleaning sequence and white-ink circulation prevent clogging and stabilize ink flow over long production cycles, and it goes as far as calling the result a near-zero-maintenance workflow. That is a marketing claim that owner reports will have to confirm. Open-ink compatibility, if it works as described, means owners aren't locked into a single consumables supplier. The release says the machine supports a wide range of third-party UV inks, with LONGER's own ink available for colour precision.

Advertisement

LONGER isn't an unknown name here. 3Dnatives notes that the company has spent about ten years making laser engravers and 3D printers, so many makers will already have come across its hardware. The ePrint pushes that customization-tool lineup into a new process.

What It Means for Makers

For a hobbyist with one FDM printer and a diode laser, a $1,500 to $1,900 UV printer is a lot to spend on a process that is adjacent to 3D printing. The target buyer is more likely the small shop or Etsy seller already doing personalized goods. That person engraves wood with a laser, prints custom parts or enclosures, and wishes the output could carry full-colour graphics or tactile detail without outsourcing.

The texture features also suggest some useful crossovers with the printers makers already own. Printing an FDM or resin part, then giving it a colour graphic or raised logo on a UV flatbed, is a reasonable route to finished-looking products from a home workshop. The relief limit and the 310 x 420 mm bed set clear boundaries. This is surface decoration on objects that already exist, not a replacement for additive fabrication.

Several open questions remain, and the available sources don't answer them. They include real-world speed at the highest relief settings, ink cost per print, how durable the raised textures are on flexible materials like leather, how much maintenance the white channel actually needs over months of use, and how polished the software is when it comes to building custom textures instead of using presets. The release also said backer shipments were scheduled to begin in June 2026. On the software side, 3Dnatives mentions LONGER Studio, AI design tools, a 2D-to-3D relief design feature and batch printing, but none of that has been tested independently. Those answers would come from long-term owner reports and independent reviews, not from a launch profile.

The bottom line is that the ePrint is an ambitious attempt to turn UV printing into something closer to digital surface fabrication, sold by a company makers already know and priced within reach of a serious side business. Treat the speed, colour and material claims as LONGER's until people outside the company have tested them.

Sources