Ceramic additive manufacturing has long had an awkward on-ramp. The machines that make dense alumina and zirconia parts are built for production, and they need a lot of expensive, carefully formulated slurry before they print anything. Two launches at Formnext 2026 try to fix that from opposite ends of the market. AdventureTech introduced the ADT Ceram-DD50, a desktop ceramic DLP printer that runs on as little as 10 mL of material. France-based 3DCERAM showed the CLP50, its first DLP platform and a deliberately compact one, built to lower the cost of getting started. Neither machine is meant to replace a production system. Both are meant to be what a lab or a small company buys first.
One caveat up front. The coverage here comes from trade press reporting on company statements made at the show. We could not find a readable spec page from either manufacturer, so treat the numbers as launch figures, not independently measured performance.
The DD50: a test bench measured in milliliters
According to 3D Printing Industry, the DD50 is the lead model of AdventureTech's new Mini series and can be ordered now. It is a top-down DLP machine. The company says top-down forming, combined with its feed design, lets the printer handle slurries across a range of viscosities.
Its headline figures are a 20 µm optical resolution and a 10 mL minimum material load. The build area is 51.2 x 28.8 x 60 mm, driven by a 2560 x 1440 optical engine. Those numbers agree with each other: 51.2 mm across 2560 pixels and 28.8 mm across 1440 pixels both work out to 20 µm per projected pixel. That is the planar pixel pitch at the image plane. Final part accuracy will also depend on light scattering in the slurry, layer behavior, and shrinkage during debinding and sintering, none of which the launch figures address.
The material handling is the more interesting part. The DD50 uses a dual-cylinder feed with blade spreading, has integrated heating, and is said to be particularly tolerant of high-viscosity slurries. Viscosity is the central problem in ceramic stereolithography. Formulators want high solids loading for density and lower shrinkage, but more powder makes the slurry thicker and harder to recoat in thin, even layers. AdventureTech says its integrated heating works with material and print settings to keep conditions stable, though forming parameters still need tuning for each formulation, and the blade spreads the slurry into each layer. A machine that does both at a 10 mL scale is built for the stage where a formulation is still being worked out.
The DD50 measures 415 x 375 x 735 mm, so it fits on a bench. AdventureTech showed it in Hall 11, Booth D71.
AdventureTech manager May Liu framed the machine around testing new alumina or zirconia formulations, according to the 3D Printing Industry report. The publication also made the direct comparison: 3DCERAM's CLP50 needs a 100 mL minimum load, ten times what the DD50 needs.
The CLP50: 3DCERAM's first step into DLP
3DCERAM is best known for larger ceramic SLA systems, so the CLP50 is a change in direction. VoxelMatters reports that it is the company's first DLP platform and that it was designed around cost accessibility. Like the DD50, it is top-down DLP.
The CLP50 is a bigger machine in every dimension. Its build volume is 96 x 54 x 100 mm and its footprint is 585 x 596 x 1,000 mm. That gives a build envelope of roughly 518 cm³, against about 88 cm³ for the DD50, or nearly six times the printable volume. That leaves room for more than a single test coupon.
3DCERAM's pitch is about business risk more than material science. VoxelMatters also lists a 50 µm lateral resolution, 10 to 200 µm layer thickness and build speeds of up to 400 layers per hour, depending on material. Sales manager Maxence Bourjol told VoxelMatters that many industrial firms hesitate to invest in large production systems before they have secured their first customers. In his framing, the CLP50 lets those firms qualify parts and win early work on a smaller machine, then scale up to 3DCERAM's larger SLA platforms when demand justifies it. TCT Magazine's coverage describes the same aim: opening the door to ceramic 3D printing with a compact machine.
Side by side
| AdventureTech ADT Ceram-DD50 | 3DCERAM CLP50 | |
|---|---|---|
| Process | Top-down DLP | Top-down DLP |
| Build volume | 51.2 x 28.8 x 60 mm | 96 x 54 x 100 mm |
| Minimum material load | 10 mL | 100 mL |
| Optical resolution | 20 µm (2560 x 1440 engine) | 50 µm lateral resolution (different spec basis) |
| Machine size | 415 x 375 x 735 mm | 585 x 596 x 1,000 mm |
| Stated purpose | Material and formulation testing | Low-cost entry with a path to larger SLA systems |
Why the minimum load matters
For most makers, minimum material load is a footnote. In ceramic AM it often decides what gets tested. A custom photocurable ceramic slurry is costly in both powder and labor. Each change to particle size distribution, dispersant, solids loading, or photoinitiator package means mixing a new batch. If the printer needs a large vat filled before it prints a single layer, every experiment costs real money, and researchers start rationing iterations.
Cutting the minimum load from the 100 mL load of the CLP50 to 10 mL changes that. A materials group can mix a small batch of a candidate zirconia formulation, print a few test geometries, sinter them, and move to the next variant without wasting most of a costly batch on vat fill. That is the use case Liu described, and the DD50's small build area fits it: it is sized for test pieces, not parts in quantity.
The CLP50 makes a different trade. Its 100 mL floor is ten times higher, but the larger envelope makes it a more realistic tool for developing and producing technical parts, which is the audience TCT Magazine says it targets. In 3DCERAM's own framing, the first sale is a foothold for a later move to bigger systems.
Bottom Line for Makers
These are not hobby machines. Neither company announced pricing in the coverage we reviewed, and ceramic AM still requires debinding and sintering equipment, a furnace schedule, and a good deal of process knowledge after the print is done. The printer is only one piece of the workflow.
Still, the direction is clear and it matters to the advanced end of the maker world: university labs, small engineering shops, and makerspaces with materials ambitions. Ceramic AM vendors are starting to treat the experimentation stage as a market in its own right, not a cost customers absorb on the way to a production system. A 10 mL top-down machine with heated, blade-spread recoating is a tool for people who want to develop their own slurries. A compact DLP machine from an established ceramic SLA vendor is a tool for people who want a supported route from first parts to production.
If you are weighing ceramic printing, ask the question these launches raise: do you need to make parts yet, or do you need to find out which material works? The answer now points to quite different hardware.