Most conversations about binder jetting treat the binder as scaffolding: a temporary glue that holds powder in shape long enough to get a part out of the bed and into a furnace, then gets out of the way. A new product launched at Formnext 2026 argues for a different view. According to an Atomik AM press release dated Frankfurt, 17 November 2026, Liverpool-based binder developer Atomik AM and Dutch binder jetting company Concr3de have introduced CoBound HiC, a high-carbon binder designed specifically for silicon carbide (SiC) binder jetting, in which the carbon the binder carries is meant to contribute to the finished part rather than simply burn away.
The two companies describe the arrangement as a partnership with clearly divided roles. Atomik AM holds the intellectual property behind the binder chemistry, while Concr3de brings its experience in printing and processing. The firms have signed an agreement to bring the binder to market together, and CoBound HiC is available to order now from either company. Printed samples were on display at Concr3de's stand at Formnext, with the release giving the location as hall 11.0, B49; VoxelMatters likewise reported printed parts at booth 49 in hall 11.0.
The Binder as an Ingredient, Not Just Glue
The central claim in the announcement is conceptual as much as technical. In conventional thinking, binder residue is something to be minimized. Atomik AM's release instead frames the binder chemistry as "an active part of the material's processing route" for silicon carbide. Because CoBound HiC is formulated with a high carbon content, and because that carbon contributes to the final part, the binder is effectively a deliberate input to the ceramic's composition rather than an impurity to be managed.
That is a meaningful shift in how a binder supplier positions its product. Rather than offering a general-purpose binder that happens to work with SiC powder, Atomik AM and Concr3de are pitching a formulation built around a specific material system and its downstream processing. The release does not spell out in detail how the carbon is incorporated during post-processing, so the precise mechanism and the resulting microstructure are questions prospective users will want to raise directly with the companies.
There is also a small naming wrinkle worth flagging. VoxelMatters' headline describes the binder as being for SiSiC 3D printing, and its article at one point refers to "silicone carbide." Atomik AM's own release consistently says silicon carbide (SiC). For the purposes of this article we follow the primary source; buyers working with a particular SiC variant should confirm compatibility with the suppliers rather than infer it from the headline.
Why Silicon Carbide
Silicon carbide is not a hobbyist material, and the reasons it attracts industrial interest are well rehearsed. VoxelMatters summarizes them: thermal stability, thermal and electrical conductivity, chemical resistance and hardness. Those same properties that make SiC attractive in service also make it difficult to shape by conventional means, which is a large part of why additive routes such as binder jetting draw attention. Printing a green body and then processing it can reduce the machining that a material this hard would otherwise demand.
Concr3de is a natural partner for that kind of work. VoxelMatters describes the company as operating an open binder jetting platform that handles ceramics, recycled stone, wood and other materials. An open platform matters here: a specialized binder is only useful if the printer can be configured to run it, and a machine maker that already runs several material types is plausibly better placed to develop the printing and processing parameters a new binder requires.
The Numbers: Green Strength
The one hard performance figure in the announcement concerns green strength, the mechanical strength of a printed and cured part before it undergoes final processing. Atomik AM reports green strength of approximately 3 to 4 MPa in cured printed SiC samples, measured by three-point bend testing. VoxelMatters reports the same range and test method.
Green strength is not a glamorous specification, but it governs a lot of practical outcomes. A green part has to survive depowdering, handling, transport between process steps and loading into furnaces. Weak green bodies chip, crack or slump, and thin or delicate features may not survive at all. A reported figure gives engineers a starting point for judging what geometries are realistic.
The release is careful to qualify the number: the 3 to 4 MPa range depends on powder, printing parameters and curing conditions. That caveat deserves to be taken seriously. Binder jetting results are notoriously sensitive to powder particle size and distribution, layer settings, binder saturation and cure profile, and a figure obtained on one set of conditions will not automatically transfer to another. It is best read as a demonstrated capability rather than a guaranteed property.
Who Says What
The release includes comments from Professor Kate Black, Atomik AM's chief executive, and from Eric Geboers, founder of Concr3de, framing the launch as a joint effort combining Atomik AM's binder chemistry with Concr3de's printing and processing know-how. Neither the release nor the VoxelMatters coverage provides pricing, packaging sizes or lead times, and no third-party validation of the green strength figures was included in the material we reviewed.
What It Means for Makers
Let us be direct: very few readers of this site will be binder jetting silicon carbide in a garage. This is an industrial materials launch, aimed at engineering teams and service bureaus running binder jet platforms. But there are a few reasons it is worth paying attention to even if your own printer extrudes PLA.
First, it illustrates a trend that runs across additive manufacturing at every scale: the consumables are becoming as strategic as the machines. Whether it is a filament formulated for a specific nozzle temperature window or a binder engineered to feed carbon into a ceramic, materials suppliers increasingly design their products around a complete process chain rather than a single step.
Second, the IP-holder-plus-machine-maker structure is a model worth noticing. Atomik AM keeps the chemistry; Concr3de supplies the processing expertise and a platform to prove it on; both sell the product. That split lets a specialist chemistry company reach customers through a hardware partner without becoming a printer company itself.
Third, for anyone in a lab, university or small engineering firm with access to binder jetting equipment, the practical takeaways are straightforward. The binder is orderable now from either company. The headline green strength is 3 to 4 MPa by three-point bend, with explicit dependence on powder, parameters and curing. And because the release does not detail the full post-processing route, anyone evaluating it should ask the suppliers for process guidance before committing powder and furnace time.
Bottom Line
CoBound HiC is a narrow, specialized product, but the idea behind it is broader: treat the binder as part of the material, not a contaminant to be removed. If that approach delivers repeatable SiC parts on open binder jetting platforms, it could make a famously difficult ceramic a little more accessible to additive workflows. For now, the evidence on the table is a single green strength range under qualified conditions, and the rest will depend on what early users report.