AMufacture, a contract manufacturer based in Portsmouth, England, has doubled its production capacity by installing new HP Multi Jet Fusion 5620 Pro printers, according to 3D Printing Industry. Each new machine has automated build changeover, which lets the facility run around the clock and turn out up to 18 full builds a day. Chief executive Craig Pyser announced the expansion at METSTRADE in Amsterdam, held 17 to 19 November, and said most of the demand behind it comes from defence customers building drones and uncrewed systems.
The company says the expansion makes it the UK's largest contract manufacturer specialising in MJF, a claim 3D Printing Industry repeats; VoxelMatters words it as the UK's "leading" MJF specialist. That is the company's own positioning, and both trade reports rely on company statements rather than independent figures. What the expansion shows more clearly is how a powder-bed polymer bureau plans capacity when its order book is driven by programmes rather than one-off prototypes.
The Changeover Is the Story
The headline says "doubled," but the more interesting detail is how AMufacture gets there without staffing the extra hours. A full MJF build at the facility runs about 12 hours. On a printer without automated changeover, a finished build sits in the machine while it cools, and someone has to be present to swap it out and start the next job. That rhythm tends to leave machines idle overnight, or forces a bureau to staff a night shift just to keep the queue moving.
The 5620 Pro units AMufacture installed load the next build while the previous one cools. Per the reports, that means no staff are required on site overnight. With roughly 12-hour builds and changeover handled by the machine, the facility can run 24 hours a day, and the figure of up to 18 full builds daily is the company's stated ceiling for that throughput.
For anyone who has run a print farm, even a hobby-scale one built from FDM machines and a spreadsheet, the logic is familiar. Utilisation, not peak print speed, decides how much a shop can actually ship. A printer that finishes at 2 a.m. and waits until 8 a.m. for a human loses a quarter of its day. Automating the handoff between jobs is often worth more than a faster machine.
Who Is Buying the Parts
Pyser was direct about where the work comes from. Most of the demand is from defence: drones and uncrewed vehicles operating in the air, on land, at sea and subsea. VoxelMatters notes that the Portsmouth base sits among a cluster of leading defence contractors, which plausibly helps explain both the customer mix and the decision to invest there.
Defence is not the whole picture. The company says automotive and marine work is rising, and that a large healthcare contract is set to begin in 2027. This is also AMufacture's third year in a row exhibiting at METSTRADE alongside HP.
The kind of part matters as much as the customer. Co-founder Will Howden put it plainly: "Up to 95 per cent of what we make is an end-use part." That is a notable figure for a polymer additive bureau. It means the output is mostly going into finished products rather than serving as fit-check prototypes or jigs. For uncrewed systems in particular, where production volumes can be modest, designs change often and weight matters, printed polymer parts can make sense as the real hardware rather than a stand-in for an injection-moulded version that comes later.
Investing Ahead of the Orders
The most revealing line from the announcement is Pyser's: "We're not waiting for contracts to be signed before we invest." He also said that, based on the current pipeline, the company expects its order book to grow again in 2027.
That is a deliberate bet. Contract manufacturers often add machines once a customer commits, because idle industrial printers are expensive. AMufacture is moving earlier, with Pyser saying customers are telling the company what they will need over the next two years and that the UK needs manufacturers with capacity, track record and security already in place when those programmes start. Howden framed it the same way: "Doubling our capacity means we can say yes to much larger programmes."
The money behind the expansion did not come from nowhere. VoxelMatters reports that AMufacture secured significant investment at the start of the year to support its growth plans, and 3D Printing Industry notes the company is backed by three investors: Maven Capital Partners, Turner & Co and Søren Ravn Jensen. Neither report gives a figure for the investment or the number of printers added.
The Paperwork Behind the Printers
Capacity alone does not win defence work. AMufacture holds ISO 9001, JOSCAR and Cyber Essentials Plus accreditations, and tracks every part through production. For a bureau handling customer design files for military hardware, those credentials are not box-ticking extras. They are part of what gets a supplier considered at all.
The company is also an HP beta-test partner for new materials and processes. That relationship gives it a hand in trialling what HP is developing for the MJF platform before it reaches the market, and gives HP a production environment where new materials get tested on real parts.
What It Means for Makers
Most FilamentFeed readers will never own an MJF printer, but this expansion is still worth reading closely for a few reasons.
First, it is another sign that polymer powder-bed fusion has settled into a production role. When a bureau says up to 95 per cent of its output is end-use parts, and its customers are drone programmes that need repeatable components, additive is no longer just the prototyping step before the "real" manufacturing method.
Second, the changeover point applies at every scale. Whether you run three printers in a garage or thirty in a unit, the biggest gains often come from cutting the time machines sit finished and waiting. Automated plate swapping, part ejection and queue management are the hobby-scale versions of what AMufacture bought.
Third, for makers who design parts for small-batch production, including drone builders, bureaus with this kind of capacity are a route from a working prototype to a run of hundreds of identical parts without tooling. More capacity at established bureaus generally means more options for people who need production parts but not a factory.
The caveat is that defence demand is lumpy, and investing ahead of signed contracts is only smart if those contracts arrive. AMufacture is betting that the 2027 order book, plus the healthcare programme, fills the machines it has just installed. If it does, the Portsmouth facility will be a useful case study in how a contract shop scales up. If it does not, it will be a case study of a different kind.