Anycubic used its stand at Formnext 2026 in Frankfurt to show AnyLab, an AI tool that turns a typed description or a reference image into a 3D model. It was the first time the tool had appeared at an exhibition. In the same press release dated November 18, the company also gave an update on its exclusive partnership with Thingiverse, under which selected models from that library of more than 2 million public designs are being adapted for multicolor printing and repackaged as printer-ready 3MF files. Taken together, the two announcements show where consumer printer makers are heading. They no longer want to sell only the machine. They want to own the step before slicing too, the moment when a user decides what to print.
Visitors can find Anycubic at Booth F01 in Hall 12.0, where the company has set up a dedicated hands-on area for AnyLab. The booth also shows the Kobra X, the Kobra S1 Max Combo and the Photon P1 resin printer, along with prints from the Thingiverse partnership covering automotive designs, tabletop gaming, costumes, home décor and architecture. Anycubic also presented a session at the Technology Stage called "Inside Anycubic MakerOnline: What's New & What's Next," covering the Thingiverse partnership, AnyLab and future development plans. Giving its online platform its own stage slot suggests the company is treating it as more than a support portal for the printers.
AnyLab: From Prompt to Mesh, and Eventually to Print
On its own, AnyLab sounds like many other generative 3D services. Describe an object or upload an image, and the system returns a model. According to Anycubic, the more ambitious part is what comes after generation. The company says it is building a fuller workflow that runs from generation to preview, then printability checks, then print preparation, and finally job submission to the printer.
That chain is the part makers should watch. Anyone who has tried AI-generated meshes knows that getting a model is the easy bit. Getting one that prints is harder. Generated geometry can include thin walls, floating fragments, unsupported overhangs and surfaces that look fine on screen but give a slicer trouble. A printability check placed between generation and slicing is meant to catch those problems before they waste filament or resin.
Anycubic also says it plans to tailor orientation, supports and print settings to the specific model, printer and material. In practice, that would mean AnyLab makes decisions that experienced users now make by hand in a slicer, such as which face goes on the bed, where supports go and which profile suits the job. The company frames this as something it plans to do, not a shipping feature, and it has not said how much control users will keep or how the tool will handle cases where its automated choices are wrong.
Thingiverse, Reformatted
The second half of the announcement continues a deal first reported in October. As VoxelMatters reported at the time, the exclusive partnership gives Anycubic users access to Thingiverse's catalog of more than 2 million models, with a dedicated collaboration section on Anycubic's Makeronline platform scheduled to go live on November 17. That earlier coverage included comments from Anycubic co-founder James Ouyang and Thingiverse CEO Romain Kidd, and noted that the list of supported printers had not yet been confirmed.
The Formnext update focuses on the conversion work. Anycubic is not just mirroring Thingiverse. It is choosing models, adapting them for multicolor printing and converting them to printer-compatible 3MF. That matters because the conversion starts from STL files, and STL files describe geometry and nothing else, with no color assignments, material data or print settings. A 3MF can carry all of that in a single package, so a model can arrive already split into color regions and ready for a multi-material system.
For owners of a multicolor machine, the practical benefit is clear. Painting colors onto an STL by hand, or splitting a single-body model into parts, is tedious and often the reason a multicolor printer ends up running single-color jobs. A curated set of pre-converted files removes that step for the models Anycubic chooses to process.
The important word there is "selected." Neither the press release nor the October coverage says how many models will be converted, how they will be chosen, or how quickly the converted set will grow. Two million models is the size of the catalog users can reach. It is not the number that will arrive ready for multicolor printing.
The Ecosystem Play
Both announcements fit a familiar pattern in consumer 3D printing. Hardware makers increasingly compete on what surrounds the printer: model repositories, cloud slicing, remote job submission and pre-tuned profiles. If the printer maker controls where the file comes from, how it is prepared and how it reaches the machine, the printer becomes the endpoint of a service.
Anycubic is attacking that from two sides. The Thingiverse deal brings in a large existing library and wraps it in Anycubic's own formatting. AnyLab is aimed at users who cannot find what they want anywhere and would otherwise have to model it themselves. The planned print-prep pipeline connects the two, sending a generated or downloaded model straight to a job on an Anycubic printer.
Anycubic, founded in 2015, says it now reaches more than 200 countries and regions. That reach gives it a large user base to keep inside its own platform, and a clear reason to try.
What It Means for Makers
For owners of Anycubic multicolor printers such as the Kobra S1 Max Combo, the Thingiverse conversions are the most immediately useful part of this news, provided their printer is on the supported list and the models they want are among the ones converted. Check both before assuming the feature covers your workflow.
AnyLab is more speculative. Text-to-3D can be good for quick props, figurines and concept pieces, but makers designing functional parts with real tolerances should not expect a prompt to replace CAD. The most useful thing to judge, once the full workflow ships, is whether the automated printability checks and orientation choices are transparent and can be overridden, or whether they are a black box.
There is also a portability question. 3MF is an open format, so converted files should in principle work in other slicers. Whether Anycubic's packaging ties them closely to its own printers and profiles is something users will find out by trying. For now, the hands-on area at Booth F01 is where visitors to Formnext can see how close AnyLab comes to its promise.