Industry
Company news, funding, mergers, and earnings across the additive-manufacturing industry.
-
Industry
Marines 3D Print a Coast Guard Boat Strainer in Hours During Korea Logistics Exercise
During CJLOTS 26 in Pohang, South Korea, Marine maintainers reverse-engineered and printed a $12 strainer for a $600,000 Coast Guard boat in under half a day, replacing what is normally a 2-3 week parts wait.
-
Industry
Airbus Qualifies Roboze's ARGO 500 HYPERSPEED for Flight-Ready Aerospace Structural Parts
Airbus has qualified Roboze's ARGO 500 HYPERSPEED platform, printing unmodified ULTEM 9085 filament, to produce flight-ready secondary structural aircraft parts.
-
Industry
Inside NMSU's DREAM Center: Training K-12 Teachers to Run the Printers
New Mexico State's NSF-funded DREAM Research Center just ran its third annual AMPD workshop, teaching K-12 educators to model, slice and operate 3D printers — and finding that the software, not the hardware, is the real wall.
-
Industry
From Waste to Furniture: Nagami and Zaha Hadid Architects 3D Print the ECHO Chair in Recycled PETG
Nagami and Zaha Hadid Architects have released the ECHO Chair, a made-to-order seat printed as a single continuous piece via large-format extrusion in recycled PETG, priced from EUR669 to EUR1,231 depending on color.
-
Industry
JuggerBot's H6-106 Prints Thermosets and Thermoplastics in One Machine — a $4M AFRL Bet on Hybrid AM
Under the AFRL-funded Project ACME, Youngstown's JuggerBot 3D is scaling the H6-106 — a large-format system that runs pellet-fed thermoplastic extrusion and two-part thermoset dispensing inside one heated chamber to build aerospace tooling.
-
Industry
Sacramento's First Permitted 3D-Printed Home Goes Up in 12 Days of Printing
RIC Robotics and Sacramento builder K4k Construction completed the city's first permitted 3D-printed building, a 1,200 sq ft ADU whose wall system was printed in 12 days — a marker of autonomous construction crossing from demo to occupied home.
-
Advertisement
-
Industry
A 3D Printed Lattice Cushion With a Medicare Code: Kalogon's Verro and the Reimbursement Barrier
Kalogon's new Verro line pairs a 3D printed variable-density elastomer lattice wheelchair cushion with something far rarer than clever geometry — Medicare code E2609, the thing that decides whether additive manufacturing reaches patients or just trade-show booths.
-
Industry
Pratt & Whitney Lines Up Two Additive Partners to 3D Print Full-Scale F135 Engine Structures
At Farnborough 2026, Pratt & Whitney signed two additive deals for the F-35's F135 engine — GKN printing a full-scale engine case with laser wire DED in Norway, and Safran Aero Boosters plus BMT Aerospace tackling supply-constrained titanium parts in Belgium.
-
Industry
Ceramic 3D Printing's Quiet Boom: Lithoz Posts 40% Materials Growth as Print Farms, Implants, and Turbine Cores Scale
Lithoz reports a 40% jump in ceramic-materials revenue for H1 2026 and raises its full-year outlook, driven by print farms, resorbable implants, and Safran's adoption of LCM silica cores for single-crystal turbine blades.
-
Industry
India's Skyroot Reaches Orbit on 3D-Printed Engines: Inside the Restartable Raman-1
Skyroot's Vikram-1 became the first privately developed Indian rocket to reach orbit, riding a fourth stage powered by a cluster of 3D-printed, vacuum-restartable Raman-1 engines that cut build time from months to days.
-
Industry
The Navy Just Cleared a 3D-Printed Copper-Nickel Valve for Submarine Duty — A Material Almost Nobody Prints
VACCO delivered a laser-powder-bed-fusion copper-nickel pressure valve cleared for US Navy submarine installation — and a second, independent supply chain is doing the same thing, which says something about where casting is losing.
-
Industry
The Army Corps Is Printing Oyster Reefs Out of Dredged Mud in Mobile Bay
USACE deployed six 3D-printed reef domes off Coden, Alabama — printed from sediment dredged out of a disposal facility, with a built-in experiment pitting pure-sediment domes against sediment-plus-shell.
