Prusa Research
Every FilamentFeed story on Prusa Research — news, reviews, and analysis, newest first.
-
Guides
3D Printer Nozzle Size Guide: 0.25mm vs 0.4mm vs 0.6mm vs 0.8mm-1.0mm
Prusa and E3D manufacturer data on how nozzle diameter caps layer height and flow rate, with per-size guidance for detail work, general printing, and speed.
-
Guides
3D Printing Temperature Guide: Nozzle and Bed Temps by Filament Type
A reference guide to nozzle and bed temperatures for PLA, PETG, ABS, ASA, TPU, and nylon, drawn from manufacturer technical data sheets and enclosure/adhesion guidance.
-
Guides
Snap Fit Design for 3D Printing: Deflection Math, Tolerances, and Material Tradeoffs
Cantilever and annular snap fits are deceptively simple mechanisms that FDM printers struggle to reproduce reliably. Here is the geometry, deflection math, clearance strategy, and material selection logic to get them right on the first print.
-
Guides
Multi-Material FDM in 2026: Why Architecture Matters More Than You Think
Choosing a multi-material printer is really a choice between three distinct hardware architectures, each with fundamentally different tradeoffs in purge waste, contamination risk, and temperature compatibility -- and the wrong choice for your materials can make certain prints impossible.
-
Guides
Manual Color Swaps Without an AMS: G-Code Pause Commands in PrusaSlicer, OrcaSlicer, and Bambu Studio
Multi-color printing without a filament changer is entirely achievable using M600 and pause-at-layer commands. The slicer implementations differ in important ways, and getting the G-code sequencing wrong produces failed swaps, ooze blobs, or color bleed that contaminates the swap layer.
-
Guides
Designing and Printing Watertight Parts: Vases, Containers, and Plumbing Fittings
FDM prints aren't watertight by default. Layer gaps, infill voids, and perimeter seams all leak. Here's how to close them — in the slicer, the design, and post-processing.
-
Guides
3D Printer Bed Adhesion: PEI, Glass, BuildTak, and Flex Plates Compared
Your build surface determines how prints stick, release, and survive long-term use. This guide compares PEI, glass, BuildTak, garolite, and textured flex plates across materials and use cases.
-
Guides
How to Fix Warping in 3D Prints: Adhesion, Brims, and Enclosures
Warping lifts print corners off the bed, ruining parts and wasting filament. This guide covers every fix: first-layer adhesion, bed surfaces, brims vs rafts, ambient temperature management, and material-specific strategies for ABS and ASA.
-
Guides
Temperature Calibration Tower Guide: Finding Your Filament's Sweet Spot
Temperature towers reveal the ideal print temperature for any filament in a single test print. This guide covers how to slice and print one, how to read the results, and how to connect temp findings to pressure advance calibration.
-
Guides
How to Fix Layer Shifting in 3D Prints
Layer shifting ruins prints by displacing layers mid-job. This guide covers every cause — belt tension, stepper current, print speed — and walks through systematic diagnosis and fixes to get your printer running true again.
-
Guides
Infill Patterns and Density: The Complete Guide to Stronger Prints
Gyroid, grid, honeycomb, lightning — every infill pattern makes different tradeoffs between strength, speed, material use, and surface quality. Here's exactly when to use each and how density changes the outcome.
-
Guides
Best 3D Printer Upgrades for the Money: Hotends, Extruders, Probes, and More
Not every upgrade improves every printer. This guide covers the hotend, extruder, bed leveling, enclosure, and frame upgrades that deliver the best return on investment for common FDM machines in 2026.
