All articles
-
Printers
Bambu Lab P1P vs P1S: Is the Enclosed Chamber Worth the Price Premium?
The P1P and P1S share the same CoreXY motion system and print quality. The difference is the enclosure, chamber heater, and camera. Here's when each choice makes sense.
-
Printers
AnkerMake M5C Review: Speed-Focused CoreXY That Trades Features for Simplicity
The M5C drops the camera, AI detection, and touchscreen of the M5 to hit a lower price point. What remains is a capable speed-oriented FDM printer with a learning-curve slicer.
-
Printers
Prusa MINI+: The Case for a Smaller, Smarter Second Printer
At 180×180×180mm build volume, the MINI+ won't replace a full-size machine. But its compact footprint, consistent quality, and open-source firmware make it one of the most practical second printers available.
-
Printers
Creality Ender 3 V3: The Budget Staple Gets a CoreXY Upgrade
The Ender 3 V3 replaces the classic bed-slinger architecture with CoreXY, adds input shaping, and targets 600 mm/s — all while maintaining the price point that made Ender 3 synonymous with budget FDM.
-
Guides
Variable Layer Height: How Adaptive Slicing Gets Better Surface Quality Without the Time Penalty
Adaptive or variable layer height lets slicers use thin layers where they matter and thick layers where they don't. The result is better surface quality at nearly the same print time.
-
Materials
Glass Fiber vs Carbon Fiber Filament: Which Reinforcement Is Right for Your Application?
Both add stiffness and reduce weight compared to base filaments. But GF and CF have different mechanical profiles, abrasion demands, and cost structures that make them suited to different tasks.
-
Guides
Threading 3D Prints: Printed Threads, Heat-Set Inserts, and Captured Nuts
Bolting 3D printed parts together reliably requires understanding when printed threads work, when heat-set inserts are worth it, and when a captured nut is the right call.
-
Guides
Resin Printing Safety: Ventilation, PPE, and Proper Disposal — What You Actually Need
Photopolymer resin contains skin sensitizers and volatile acrylate monomers. Setting up a safe workspace isn't optional — here's exactly what's required and why.
-
Guides
Living Hinges and Flex Joints: Designing Bendable Features Directly Into FDM Prints
A living hinge folds thousands of times without a fastener. In FDM, making it work requires specific geometry, the right material, and a print orientation that isn't obvious.
-
Guides
Designing and Printing Watertight Parts: Vases, Containers, and Plumbing Fittings
FDM prints aren't watertight by default. Layer gaps, infill voids, and perimeter seams all leak. Here's how to close them — in the slicer, the design, and post-processing.
-
Guides
First-Time 3D Printer Setup: From Unboxing to First Successful Print
New printer, blank slate. The gap between unboxing and a clean first print is narrower than it used to be — but getting there still requires understanding a few non-obvious steps.
-
Guides
Ironing in FDM: The Slicer Setting That Makes Flat Surfaces Glass-Smooth
Ironing passes a nearly-dry nozzle over the top layer after it's printed, remelting the surface into a flat, glossy finish. Here's how it works and when to use it.
Page 44 of 56
